I recently have been experimenting with cutting some bolt end caps from a piece of 13/32 x .014 wall brass tubing that I bought at a hobby shop. Unfortunately the pipe cutter crimps the end ever so slightly, which makes them no longer slide over the full 3/8 shafting I'm using, but I expect they would be fine and even would allow a tiny bit of room for glue if using 23/64 or smaller shafts. The brass tubing is made by a company called K&S Engineering and is widely available online; it runs around $3 for a 12 inch piece.<div>
<br></div><div>in service,</div><div><br></div><div>Eirik Gralokkr</div>